The Glove Port Assembly consists of an inner securing ring on the inside of a perspex viewing panel. The glove port is fastened to the inner securing ring with screws and two gaskets, and has two grooves to take the beaded end of a glove. The bung assembly is adjustable for seal tension controlled by a centre knob. For safety, the bung may be locked in position to prevent it being sucked into the box.
The material used for these Glove ports is black phenolic plastic with brass M6 inserts for the inner securing rings and stainless steel fixing screws.
192mm (8") Transfer Port Assemblies
Stores No. 44/14700.
Material: Cotton filled phenolic resin.
Dimensions: Flange dia: 236.6mm with 12 x 7mm holes on 219mm PCD. Snout
dia: 203mm. Bore dia: 192mm.
Gasket for MK2 192mm (8") Transfer Port
Stores No. 44/14725.
Material: Neoprene.
Dimensions: 244.5mm O/D x 193.7mm I/D with
12 x 7mm holes on 219mm PCD.
Inner Securing Ring for MK2 192mm (8") Transfer
Port
Stores No. 44/14750.
Material: Cotton filled phenolic resin.
Dimensions: 244.5mm O/D x 192mm I/D with 12 x M6 inserts on 219mm PCD.
Bung Assembly for MK2 192mm (8") Transfer
Port
Stores No. 44/14775.
Material: Cotton filled phenolic resin.
Dimensions: Flange dia: 200mm. Boss dia: 191.3mm.